PENRITE Red Oem Coolant Premix

Product Description

Red OEM Coolant Premix is a GENUINE GLYSANTIN® G40® Original Equipment Manufacturer (OEM), fully licensed and warranty approved, Type A ethylene glycol, anti-freeze anti-boil coolant as used in initial manufacturer factory fills. It uses a technically advanced Si-OAT (Organic Acid Technology) based inhibitor system that is Phosphate, Amine, Borate and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system for 12 years or 800,000km.

PLEASE NOTE: Red OEM Coolant Premix replaces 8 Year 500,000 KM Red Coolant Premix and 6 Year Extended Drain Anti Freeze Anti Boil Coolant.

Application

Red OEM Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel engines requiring full Si-OAT Type A anti-freeze / anti-boil / anti-corrosion properties.

Suitable for cars, 4WDs, motorcycles, light and heavy duty commercial vehicles, construction and agricultural equipment. Especially suited to vehicles of European origin such as Audi, Bentley, Bugatti, Lamborghini, VW, Seat and Skoda (all 2008 on), MAN trucks (Dec 2011 on), Mercedes-Benz trucks (Oct 2011 on) and Porsche (911, Boxster, Cayman, Cayenne, Panamera) 1997 onwards.

Provides extended long-term protection against rust and corrosion for all materials including cast iron, aluminium, copper and solder alloys, as well as hoses, seals and plastics. Especially effective in all-aluminium engines under load or in extreme hot and cold climates. May be used in all vehicles that use red, magenta or orange coloured initial fill coolants, and is suitable for out-of-warranty service to maintain OEM performance.

It is a 50% concentration formulation, ready to use directly from the container — pre-mixed with Penrite De-Mineralised Water. No further dilution is required. Can be used as a complete service refill, top up, or mixed with compatible Type A coolant. Penrite recommend maintaining a 50% concentration level for maximum performance and longevity.

Please Note: A 58mm cap with pouring tap is available to fit 20 litre packs.

Coolant Flushing

Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.

Dose Rate – Freezing Point / Boiling Point

Benefits

• 12 Year or 800,000 km (whichever comes first) drain intervals if used and maintained at 50%
• OEM Approved to maintain manufacturer’s warranty
• Compatible with all plastics, rubbers and seals
• Protects all internal surfaces from corrosion, including aluminium
• Phosphate free formulation allows use with hard water
• Borate, Nitrite and Amine free

Specifications

Manufacturer’s (OEM) Approvals & Industry Licences

• Audi TL 774-G / Bentley TL 774-G / Bugatti TL 774-G
• Cummins CES 14603
• Deutz DQC CC-14 / Deutz Fahr Harvesters (from 04/2017)
• Ducati (Approved)
• Lamborghini TL 774-G
• Liebherr Minimum LH-01-COL3A
• MAN 324 Type Si-OAT
• MB-Approval 326.5 / 326.6
• MTU MTL 5048
• Porsche (From 2010)
• Seat TL 774-G / Skoda TL 774-G / VW TL 774-G

Product Performance Levels

• AS 2108-2004 Type A
• ASTM D-3306
• BS 6580
• Glysantin® G40®
• G12++
• GM 1825M / 1899M / 6277M / Holden 6277M
• JASO M325 (Japan) / JIS K2234 (Japan)
• MAN 324 Type Si-OAT
• MB 326.5 / 326.6
• SAE J1034
• Scania T1.02-98 0813
• Toyota Long Life TSK2601G