{"product_id":"penrite-dpf-cleaning-fluid-kit","title":"PENRITE Dpf Cleaning Fluid Kit","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe \u003cstrong\u003e\u003ca\u003eDPF\u003c\/a\u003e Cleaning range\u003c\/strong\u003e is a range of professional DPF cleaning products, developed as a cost and time effective method for cleaning clogged Diesel Particulate Filters \u003ca\u003e(DPF)\u003c\/a\u003e. \u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003ca\u003e\u003cstrong\u003eDPF Cleaning Gun \u003c\/strong\u003e\u003c\/a\u003eis a special cleaning gun, purposely designed to be used with Penrite DPF Cleaning Fluids. It includes a hose with a conical nozzle, this nozzle should be connected to the soft hose of the front pressure sensor. This is typically the easiest access option which gives good results with minimal effort.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDPF Cleaning Fluid (Step 1) \u0026amp; DPF \u003ca\u003eFlushing\u003c\/a\u003e Fluid (Step 2) \u003c\/strong\u003eare designed to work in conjunction with each other to loosen, disperse, remove, and flush out soot to facilitate a full regeneration of the Diesel Particulate Filter (DPF). The \u003cstrong\u003eDPF Cleaning Fluid\u003c\/strong\u003e soaks the accumulated soot particles and dissolves the various contaminations while the \u003cstrong\u003eDPF Flushing Fluid\u003c\/strong\u003e flushes out the substrate and repositions the accumulated soot to be within the soot trap. Upon completion of the two-step system, the DPF is now ready for regeneration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDPF Cleaning Gun Probe\u003c\/strong\u003e is a direct cleaning probe to be used with the DPF Cleaning Gun when used in a sensor opening which allows for a direct spray onto the filter monolith.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDirections for use:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIMPORTANT -\u003c\/strong\u003e Always use appropriate PPE when required (\u003ca\u003egloves\u003c\/a\u003e and safety goggles should be used whilst performing the following process)\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e1st Step – DPF Cleaning Fluid\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca\u003eFill\u003c\/a\u003e the DPF Cleaning Gun tank with the DPF Cleaning Fluid and connect the sprayer to an air compressor, the pressure reducer connected to the gun will automatically reduce the pressure to 4kg\/cm2\u003c\/li\u003e\n\u003cli\u003eStart the vehicle and let it reach normal operating \u003ca\u003etemperature\u003c\/a\u003e, then turn off the vehicle.\u003c\/li\u003e\n\u003cli\u003eLocate the pressure sensor for the DPF and disconnect the hose either at the sensor or from the DPF itself. (On some vehicles the sensor will be located in the engine bay and on others, closer to the DPF). Alternatively, if the DPF has a temperature sensor at the front of the DPF, this can be removed and the inlet used for the cleaning process.\u003c\/li\u003e\n\u003cli\u003eConnect the conical nozzle to the pressure sensor hose leading to the front of the DPF or insert the hose (without the conical nozzle attached) into the front of the DPF through the temperature sensor inlet. If using the DPF cleaning probe, this can be used to penetrate further into the DPF during this process.\u003c\/li\u003e\n\u003cli\u003ePulse the \u003ca\u003eDPF cleaner\u003c\/a\u003e into the front of the DPF for 1 min and let it settle for 2-3 mins, repeat this step until all the DPF Cleaning Fluid has been used.\u003c\/li\u003e\n\u003cli\u003eOnce the DPF Cleaning Fluid has been used, run the engine for 2-3 mins at 2000-2500 RPM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e2nd Step – DPF Flushing Fluid\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFill the DPF Cleaning Gun tank with the DPF Flushing Fluid and connect the sprayer to an air compressor, the pressure reducer connected to the gun will automatically reduce the pressure to 4kg\/cm2\u003c\/li\u003e\n\u003cli\u003eConnect the conical nozzle to the pressure sensor hose leading to the front of the DPF, the same as in the 1st step\u003c\/li\u003e\n\u003cli\u003eStart the engine. With the engine running at around 2000 RPM pulse the complete amount of DPF Flushing Fluid into the front pressure hose, the DPF Cleaning Gun tank has a 1L \u003ca\u003ecapacity\u003c\/a\u003e and will need to be refilled during this process. Turn the vehicle off before removing the gun to refill.\u003c\/li\u003e\n\u003cli\u003eAfter flushing, ensure the sensor hose is dried carefully using your air compressor, to prevent sensor damage or incorrect reading from the ECU\/diagnostic tools.\u003c\/li\u003e\n\u003cli\u003eReconnect the sensor and drive the car for 20 mins at a consistent \u003ca\u003espeed\u003c\/a\u003e at 2500 RPM to initiate a regeneration cycle. Alternatively, start a regeneration cycle via the computer following the car manufacturer's guidelines\u003c\/li\u003e\n\u003cli\u003eReset any warning codes\/signals related to DPF blockage or malfunctioning\u003c\/li\u003e\n\u003cli\u003eClean the DPF Cleaning Gun and DPF Cleaning Probe (if used) thoroughly with water immediately after use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNOTE:\u003c\/strong\u003e We recommend placing a fluid bucket under the cars exhaust during cleaning to catch expelled cleaning and flushing fluid from the process.\u003c\/p\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eBenefits\u003c\/h2\u003e\n\u003cdiv\u003e\u003cul\u003e\n\u003cli\u003ePrevents expensive \u003ca\u003eDPF\u003c\/a\u003e replacement and keeps DPF regeneration work inhouse\u003c\/li\u003e\n\u003cli\u003eConvenient and easy to use without the need to dismantle the DPF\u003c\/li\u003e\n\u003cli\u003eReduces harmful emissions and hazardous exhaust gases\u003c\/li\u003e\n\u003cli\u003eInnovative 2 step approach for maximum combined effectiveness\u003c\/li\u003e\n\u003cli\u003eLoosens, dissolves, and removes soot deposits in the particulate filter\u003c\/li\u003e\n\u003cli\u003eFacilitates complete regeneration\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/div\u003e","brand":"Penrite","offers":[{"title":"1 Kit (Box of 4)","offer_id":45643680153653,"sku":"RGE2500","price":315.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0567\/8193\/0549\/files\/DPFCKIT.png?v=1781581294","url":"https:\/\/rgeaus.com.au\/products\/penrite-dpf-cleaning-fluid-kit","provider":"Rg Enterprises","version":"1.0","type":"link"}