PENRITE Brake Fluid Super Dot 4

Product Description

SUPER DOT 4 BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.

Application

Recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WDs, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non-petroleum based DOT 3, DOT 4 or Super DOT 4 brake and clutch hydraulic fluid.

Suitable for use where the vehicle manufacturer specifies DOT 3 or DOT 4 brake fluid. Should be changed according to the manufacturer’s service specifications.

Can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid SUPER DOT 4 prior to first fill or before refilling.

Please Note

• Do not mix this product with SILICONE DOT 5 or MINERAL type brake fluids
• For vehicles that require mineral based products (e.g. Citroen), Penrite LHM Plus should be used
• Not mixable with silicone type assembly compounds
• Avoid contact with skin, varnish and paint. If skin contact occurs, wash with water

Caution

Brake fluids are naturally hygroscopic and will absorb water from the air, lowering the effectiveness of the product. After opening, ensure cap is resealed tightly to avoid water contamination.

Benefits

• Excellent braking response due to high boiling point
• High wet boiling point ensures long term retention of fluid performance
• Better performance for life of fluid compared to DOT 3 fluids
• Compatible with all common brake system materials
• Compatible with DOT 3 and DOT 5.1 (low temperature, non-silicone type)

Specifications

Product Performance Levels

• AS 1960.1-1995
• DOT 3 / DOT 4 / SUPER DOT 4
• Ford ESZ-M6C55-A
• Holden HN 1796
• ISO 4925
• JIS K2233 (Japan)
• SAE J1703 / SAE J1704
• US FMVSS No 116 Super DOT 4